Device Settings; Dell Lifecycle Controller; Embedded Systems Management - Dell PowerEdgeFC430 Owner's Manual

Entering the iDRAC Settings utility
1 Turn on or restart the managed system.
2 PressF2during Power-onSelf-test(POST).
Onthe SystemSetup Main Menu page, click iDRACSettings.
3
The iDRAC Settings screen is displayed.
Related links
iDRAC Settings utility
Changing the thermal settings
The iDRAC settings utility enables you to select and customize the thermal control settings for your system.
Click iDRAC Settings > Thermal.
1
Under SYSTEM THERMAL PROFILE > Thermal Profile, select one of the following options:
2
• Default Thermal Profile Settings
• Maximum Performance (Performance Optimized)
• MinimumPower(PerformanceperWattOptimized)
Under USERCOOLINGOPTIONS, setthe Fan SpeedOffset, Minimum Fan Speed, and Custom Minimum Fan Speed.
3
Click Back >Finish >Yes.
4
Related links
iDRAC Settings utility

Device Settings

Device Settings enables you to configure device parameters.
Related links
System BIOS

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, configuration,
update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system embedded Unified
Extensible Firmware Interface (UEFI) applications.
Related links

Embedded systems management

Embedded systems management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the system's lifecycle. The Dell Lifecycle
Controller can be started during the boot sequence and can function independently of the operating system.
NOTE: Certainplatformconfigurationsmaynot supportthefullset offeaturesprovidedbythe Dell Lifecycle Controller.
Formoreinformationaboutsettingupthe DellLifecycleController,configuringhardwareandfirmware,anddeployingtheoperating
system, see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.
44 Pre-operating system managementapplications