Installingan Ssdblank; Removing The Ssdcage - Dell PowerEdgeFC430 Owner's Manual

Installingan SSDblank

Prerequisites
1 Followthesafetyguidelineslistedinthe Safetyinstructions section.
2 Remove theSSD.
Steps
Insert the SSD blank into the SSD slot until the release latch clicks into place.
Figure 37. Installing an SSD blank
1 SSD blank
Next steps
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing an SSD carrier
After working inside your system
Installingan SSDblank

Removing the SSDcage

Prerequisites
CAUTION: Manyrepairsmay onlybedonebyacertifiedservicetechnician. You shouldonlyperformtroubleshooting andsimple
repairsasauthorizedinyourproductdocumentation,
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Followthesafetyguidelineslistedinthe Safetyinstructions section.
2 FollowtheprocedurelistedintheBefore workinginside yoursystemsection.
3 Remove the SSD(s).
4 Disconnect all connected USB devices.
5 Keep the Phillips #1 screwdriver ready.
92 Installing and removing sled components
orasdirectedbytheonlineortelephoneserviceandsupportteam.