Idrac Direct Led Indicator Codes - Dell PowerEdgeFC430 Owner's Manual

Drive-Status indicator pattern
Flashes green, amber, and then turns off
Flashes amber four times per second
Flashes green slowly
Steady green
Flashes greenfor three seconds, amber for three
seconds, andturnsoffaftersixseconds

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Figure 5. iDRAC Direct LED indicator
1 iDRAC Direct status indicator
TheiDRACDirectLEDindicatortabledescribes iDRACDirectactivitywhenconfiguringiDRAC Directbyusingthemanagementport(USB
XML Import).
Table 5. iDRAC Direct LED indicators
Convention iDRAC Direct LED
indicator pattern
A Green
B Flashing green
C Green and turns off
D Not lit
Condition
NOTE:Thedrivestatusindicatorremainsoffuntilalldrivesare
initializedaftersystempowerissupplied. Drivesarenotreadyfor
insertion or removal during this time.
Predicted drive failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
Condition
Turns green for a minimum of two seconds to indicate the start and end of a file transfer.
Indicates file transfer or any operation tasks.
Indicates that the file transfer is complete.
Indicates that the USB is ready to be removed or that a task is complete.
PowerEdge FC430 system overview 11