Mounting And Beam Alignment; Mounting With Standard Fixed Brackets (F39-Lgf) - Omron F3SG-R Series Quick Installation Manual

Wiring

5. Mounting and Beam Alignment

5-1. Mounting with Standard Fixed Brackets (F39-LGF)

■
Dimensions (Check position)
[Backside mounting]
Standard Fixed
Bracket
(F39-LGF)
Standard Fixed
Bracket
(F39-LGF)
F3SG-RE30 Series
Dimension A
4-digit number of the type name
Dimension C1
(Protective height)
Dimension D
Dimension P
Protective height Number of Standard
(C1) Fixed Brackets *1
0190 to 1230
1310 to 2270
2350 to 2510
*1. The number of brackets required to mount either one of emitter and receiver.
*2. Mounting an emitter or receiver with one bracket is possible for the models of protective height of 0160 to 0270. In this case, locate
this bracket at half the Dimension A (or at the center of the sensor length).
Refer to Safety Light Curtain F3SG-R Series User's Manual for dimensions of side mounting.
F3SG-RE
Quick Installation Manual
Mounting/Beam Alignment
40
35
9.2
24.85
C1
C1-50
20
Dimension F
2 *2 1000 mm max.
3 1000 mm max.
4 1000 mm max.
35
2-M5 or M6
2-M5 or M6
24.85
< Screw: M5 or M6 >
F3SG-RE14 Series
Dimension A
4-digit number of the type name
Dimension C2
(Protective height)
Dimension D
Dimension P
Protective height Number of Standard
(C2) Fixed Brackets *1
0160 to 1200
1280 to 2080
Operation check
[ Unit : mm ]
C2+30
C2-20
10
Dimension F
2 *2 1000 mm max.
3 1000 mm max.
Step1
Check
position
Step2
Mount
4