4.9.2.
32
COM600 series 5.1
Sequence Control Configuration Manual
Assigning a start action object to a sequence
To assign a start action object to the sequence:
1. Double-click the Value column for the Main active parameter available in the
properties view.
2. Click the "..." button to launch the Input Assistant dialog.
3. In the Input Assistant dialog, click Subobjects in the Categories list.
4. Select the Start action object and click OK. This assigns the Start action object to
the Start_Sequence step.
Figure 4.9.2-1 Input assistant dialog for adding an action object
1MRS755001
Logic_Editor_Input_Assistant.png