Assigning An End Action To A Sequence - ABB COM600 series User Configuration Manual

4.9.4.
34
COM600 series 5.1
Sequence Control Configuration Manual
Figure 4.9.3-2 Step-transition in the program editor view
4. Rename the added Trans0 object to TRUE by double-clicking the object and editing
the name.

Assigning an end action to a sequence

To assign an end action object to the sequence:
1. Select Step0 and change the Name parameter to End_Sequence in the properties
view, see Figure 4.9.4-1.
2. Assign the End action object to the End_Sequence step by selecting it and editing
the Main entry parameter in the properties view.
Figure 4.9.4-1 Adding an End_Sequence step to Sequence SFC
1MRS755001
Logic_Editor_Step_Transition.png
Logic_Editor_End_Sequence.png