LinMot B1100-PP Quick Start Manual page 10

Quick Start Guide B1100-PP
Set the input X14.3 high, so motor moves to 50mm. This absolute motion command is
configured in the EasySteps parameter section.
The output of range indicator 2 (mapped to X14.7) has been cleared. The output in target
position (X14.5) may be cleared for a short time and will be set again.
The range indicator 2 is configured as shown:
This output is high, if the term (Actual Position – 0) is in the range from 45mm to 51mm.
Page 10 of 17 Quick Start Guide B1100-PP, 18.12.2013 NTI AG/ LinMot/