Integra VACUSAFE Operating Instructions Manual page 7

VACUSAFE – Operating instructions V12
3.3.3 Connection of the bottle and hand operator
3
www.integra-biosciences.com
1) Place the bottle without lid in the base of the instrument.
Insert the bottle handle into the neck of the bottle by
screwing it in place. Close the bottle with the lid fitted
with tubing openings and make sure that the lid is
1
screwed on tightly.
2) Connect one end of the blue tubing to the filter and the
other end either to the fitting on the lid marked "P
2
(model 158 320) or to the blue tubing coupling (models
158300, 158 310).
3) Connect the long transparent tubing to the fitting on the
lid marked "H
coupling
VACUBOY hand operator into the other end of the long
tubing.
" (model 158320) or to the red tubing
AND
(models 158300,
Installation
UMP
158 310). Insert the
"
7