Table of Contents Indication For Use .......................................2 Table of Symbols ........................................3 General Warnings ........................................4 9300XSP Overview ......................................5 Inspection Before Use ......................................5 Optional Floor Stand Assembly ..................................6 Installation to Floor Stand ....................................6 Light Source Operation ...................................... 7 Xenon Lamp Module Replacement ................................8 - 9 Turret Change ........................................
This device is designed to supply high-intensity white light to a fiber optic cable for illumination of a surgical field or other area of examination or operation. The Integra® Luxtec® 9300XSP Light Source should never be used in ocular surgery or in a surgical procedure requiring direct illumination of the eye.
Symbols Found on a medical grade light source, other illumination related equipment, fiber optic cables and corresponding packaging. Caution Consult Instructions for Use Fuse Caution: High Voltage Alternating Current High Temperature Type CF Equipment Refer to Instruction Manual Type BF Equipment Equipotentiality Do Not Dispose Protective Earth...
General Warnings The user of this Integra product should be thoroughly familiar and trained in the assembly, use and care of this product. The user should carefully study the Operation and Service Manual before making any attempt to use the equipment in the clinical environment.
The bulb life is indicated in hours of use on the front panel by a digital meter. Note You must use ONLY an Integra supplied lamp module assembly for replacement in this Light Source. Use of other lamps or lamp assemblies will void all warranties for this product. Refer to Parts List later in this manual.
Integra Luxtec ® ® 9300XSP 300 Watt Xenon Light Source Optional Floor Stand Assembly There are four (4) parts to the floor stand assembly: See Figure 3. 1. Base with five (5) casters (2 locking) Fiber optic 2. One column with light source base plate cable holder 3.
Light Source Operation 9300XSP Power on the Light Source The power switch is located on the front panel. See Figure 1. Ignition clicking sounds are normal. Some light will show through the turret wheel and the fan outlets. When the power switch is pressed, it will light up indicating power is on.
The Xenon Lamp Module should be replaced after 650 hours of use or if the lamp fails to start when the power is turned on. Note You must use ONLY an Integra supplied lamp module assembly for replacement in this Light Source. Use of other lamps or lamp assemblies will void all warranties for this product. Refer to Parts List later in this manual.
Page 11
To replace the lamp: 1. Replace the lamp module assembly only with an Integra provided lamp module assembly. 2. Firmly grasp the lamp module by the protective cover with one hand while pressing the release button with the other. Do not touch the glass surface of the lamp itself.
Integra Luxtec ® ® 9300XSP 300 Watt Xenon Light Source Turret Assembly Replacement Wolf port How to remove the turret: 1. Turn off Light Source. Unplug unit. 2. Rotate turret until Wolf port is lined up at 12 o’clock. See figure 14.
Ordering Equipment: 9300XSP Parts List To place an order, contact your local Integra distributor or call Integra Customer Service at 1-800-325-8966 (USA & Canada only) or +1-914-789-7094 to identify your local Integra representative. Note Dual Turrets are identified as a two letter suffix. The first letter indicates the primary turret option and the second letter indicates the secondary turret option.
(see lamp replacement), or there is a power failure. Try replacing the lamp module. If you still experience difficulties, return the unit to Integra for evaluation.
Specifications Lamp Type Xenon Short Arc Lamp Wattage 300 Watts Color Temperature >5000 Kelvin, IR Filtered Bulb Warranty 650 Hours, Prorated per Hour Position Horizontal ±15° Light Source Dimensions 15”L x 12”W x 5”H (381mm L x 305mm W x 127mm H) Weight 21 lbs.
Integra Luxtec ® ® 9300XSP 300 Watt Xenon Light Source Electromagnetic Compatibility (EMC) User Information Warning Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to the Electromagnetic Compatibility [EMC] information provided in the accompanying documents.
Page 17
Electromagnetic Compatibility (EMC) User Information Table 202: Guidance and Manufacturer’s Declaration—Immunity All Equipment and Systems The XSP/XDP is intended for use in the electromagnetic environment specified below. The customer or user of the XSP/XDP light source should assure that it is used in such an environment. Immunity Test IEC 60601 Test Level Compliance Level...
Page 18
Integra Luxtec ® ® 9300XSP 300 Watt Xenon Light Source Electromagnetic Compatibility (EMC) User Information Table 204: Guidance and Manufacturer’s Declaration – Emissions Equipment and Systems that are NOT Life-Supporting The XSP light source is intended for use in the electromagnetic environment specified below. The customer or user of the XSP light source should assure that it is used in such an environment.
Integra warrants that the new 9300 XSP light source shall be free from defects in material and workmanship under normal use and service for a period of three (3) years from the date of shipment. Integra’s sole and exclusive liability under the warranty shall be, at Integra’s option, either to repair any component which fails during the warranty period due to any defect in...
Need help?
Do you have a question about the Luxtec 9300XSP and is the answer not in the manual?
Questions and answers