Step 8: Has A Wireless Survey Been Carried Out?; Step 9: Check The Device Signal Strength; Step 10: Still Experiencing Problems? - EMS FireCell Radio Hub Quick Start Manual

Step 8 Has a wireless survey been carried out?
POWER
FAULT
Step 9 Check the device signal strength:
Whilst trying to improve wireless communication, it is important that signal levels are
checked to ensure they are adequate. The devices bi-directional signal information is
displayed in the 'Signal level' menu, found in the Radio Hub:
From front display
Received signal levels should be a minimum of 20dB.
Ch1 D RCC01 016dB
Step 10 Still experiencing problems?
Call EMS Technical Support on +44 (0) 8712 710 804* for expert advice.
*
Calls cost 7p per minute plus your phone company's access charge.
www.emsgroup.co.uk
+44 (0) 1227 369570
enquiries@emsgroup.co.uk
The information contained within this literature is correct at time of publishing. EMS reserves the right to change any information regarding products as part of its continual development
enhancing new technology and reliability. EMS advises that any product literature issue numbers are checked with its head o ce prior to any formal speci cation being written.
©2018 EMS Ltd. All rights reserved
Device Status
Page 4 of 4
Select desired device no
Ch1 D RCC01 028dB
Signal Level
MK252 Iss 3 15/08/2018 AJM