Warning; International Electrical Symbols - AEMC Simple Logger AmpFlex AL24-2500 User Manual

These safety warnings are provided to ensure the safety of personnel
and proper operation of the instrument.
• Read the instruction manual completely and follow all the safety
information before attempting to use or service this instrument.
• Use caution on any circuit: Potentially high voltages and currents may
be present and may pose a shock hazard.
• Read the specifications section prior to using the probes. Never
exceed the maximum voltage ratings given.
• Safety is the responsibility of the operator.
• For maintenance, use only original replacement parts.
• NEVER open the back of the instrument while connected to any circuit
or input.
• ALWAYS inspect the instrument and leads prior to use. Replace any
defective parts immediately.
• NEVER use the Simple Logger
electrical conductors rated above 600V in overvoltage Category III
(CAT III).

International Electrical Symbols

This symbol signifies that the loggers are protected by double or
reinforced insulation. Use only specified replacement parts when
servicing the instrument.
This symbol signifies CAUTION! and requests that the user refer
to the user manual before using the instrument.
Simple Logger

Warning

®
AmpFlex
3
®
®
AmpFlex Current Probes
®
Current Probes on