Using The Software; Cleaning - AEMC Simple Logger AmpFlex AL24-2500 User Manual

®
®
Simple Logger AmpFlex Current Probes

USING THE SOFTWARE

Launch the software and connect the RS-232 cable from your computer
to the logger.
Note: The first time the program is launched you will need to select a
language.
Select "Port" from the menu bar and select the Com port you will be
using (see your computer manual). Once the software automatically
detects the baud rate, the logger will communicate with the computer. (ID
number of the logger and number of points recorded displayed).
Depending on the selected range, "ALXX-2500" or "ALXX-250" will be
displayed and automatically scale the graph accordingly.

Cleaning

The body of the logger should be cleaned with a cloth moistened with
soapy water. Rinse with a cloth moistened with clean water. Do not use
solvent.
9