Software; Minimum Computer Requirements; Installation - AEMC Simple Logger AmpFlex AL24-2500 User Manual

®
®
Simple Logger AmpFlex Current Probes

SOFTWARE

MINIMUM COMPUTER REQUIREMENTS

Processor: 486 or higher
RAM Storage: 8MB
Hard Drive Space: 8MB for application, approx. 400K for each stored
7, 8, 8.1, 10
®
file Environment: Windows
Port Access: (1) 9-pin serial port and (1) parallel port for printer support

INSTALLATION

software is supplied on a USB drive. To install the
®
Your Simple Logger
program, perform the following steps:
Auto Run Disabled: If Auto Run is disabled, insert the Simple
drive into the USB slot, then select Run from the Start Menu.
®
Logger
In the dialog box that appears, type: D:\setup, then click the OK button.
NOTE: In this example, your drive is assumed to be drive letter D. If this
is not the case, substitute the appropriate drive letter.
®
Auto Run Enabled: If Auto Run is enabled, insert the Simple Logger
drive into the USB slot and follow the on-screen prompts to
complete the setup.
• Select Simple Logger 6.xx
• Select Acrobat Reader to install Adobe Reader
• Select Explore Drive to view the User Guide, Simple Logger
®
Catalog
or user specific manuals in PDF format.
To view the documents included on the drive, you must have
Acrobat Reader installed on your machine. If you do not have it
Software drive.
®
installed, you can install it from the Simple Logger
Installing Acrobat Reader: Select Run from the Start Menu. In the
dialog box that appears, type: D:\Acrobat\setup, then click OK.
NOTE: In this example, your drive is assumed to be drive letter D. If this
is not the case, substitute the appropriate drive letter.
8