Warning - AEMC FlexProbe User Manual

®
FlexProbe - Flexible AC Current Probe
These safety warnings are provided to ensure the safety of
personnel and proper operation of the instrument.
• Read the instruction manual completely and follow all the
safety information before attempting to use or service this
instrument.
• Wear protective clothing and gloves as required.
• Use caution on any circuit: potentially high voltages and
currents may be present and may pose a shock hazard.
• Read the safety specifications section prior to using the
current probe. Never exceed the maximum voltage ratings
given.
• Safety is the responsibility of the operator. The FlexProbe
must be used only by qualified personnel using applicable
safety precautions.
• ALWAYS de-energize the circuit before wrapping the
FlexProbe
parts. Do not wrap on live conductors.
• ALWAYS connect the electronic module to the display
device before wrapping the FlexProbe
being tested.
• ALWAYS inspect the module, sensor, sensor cable, and
output terminals prior to use. Replace any defective parts
immediately. Use only factory parts.
• NEVER use the FlexProbe
above 1000V in overvoltage category III.

Warning

®
around bare conductors, bus bars, or near live
®
around the sample
®
on electrical conductors rated
- 2 -
®