Hard Drive/Ssd Indicators; Storage Controller Module Indicators - Dell PowerEdge FD332 Owner's Manual

Indicator pattern
Solid blue
Blinking blue
Blinking amber

Hard drive/SSD indicators

The hard drive/SSD indicators are located on top of the drive drawer. There is a single status/activity indicator for each drive slot.
Figure 3. Hard drive/SSD indicators
1 hard drive/SSD indicator
Drive-Status Indicator Pattern
Off
Steady green
Blinks green and turns off
Blinks green (On 250 ms Off 250 ms)
Blinks green (On 400 ms Off 100 ms)
Blinks amber (On 150 ms Off 150 ms)
Blinks green (500 ms), amber (500 ms), and turns off one second
Blinks green three seconds, turns off three seconds, blinks amber
three seconds, and turns off three seconds

Storage Controller Module indicators

The Storage Controller Module (SCM) indicators are located on top of the drive drawer.
Description
The storage sled is powered on, and is operating normally.
The compute sled to which the storage sled is mapped, is identified.
The storage sled or any component inside the storage sled is in fault
condition.
2 hard drive/SSD release tab
Description
Drive slot empty
Drive online, but no activity
Drive online with drive activity
Drive being identified or preparing for removal
Drive rebuilding
Drive failed
Drive predicted failure
Drive rebuild aborted
About your Dell PowerEdge FD332 7