Dell PowerEdge FD332 Owner's Manual page 21

CAUTION: To ensure that a storage sled is properly installed, slide the sled into the enclosure bay until the dotted line on top
of the storage sled is not visible from the top edge of the bay in which the storage sled is being installed.
CAUTION: If a compute sled is already installed in an enclosure bay above the bay in which you are installing a storage sled,
the compute sled may obscure the dotted line on the storage sled. Do not use the compute sled installed in the top
enclosure bay as a point of reference for visibility of the dotted line on top of the storage sled. For the storage sled to be
properly installed, ensure that the dotted line on the storage sled is not visible from the top edge of the bay in which the
storage sled is installed.
3 Slide the storage sled into the enclosure until the dotted line on top of the sled is not visible from the top edge of the bay, and the sled
clicks into place.
4 Turn the storage sled locks to the lock position, to secure the sled in the enclosure.
CAUTION: Ensure that the sled locks are in locked position before opening the storage sled drive drawer, as the storage sled
must be locked in the enclosure before you open the drive drawer.
Figure 18. Installing a storage sled
1 dotted line on storage sled
Next step
Turn on the compute sled(s) to which the storage sled is mapped. The storage sled turns on.
Related links
Safety instructions
Storage sled mapping configurations
2 sled lock (2)
Installing and removing storage sled components 21