Technical Specifications-Poweredge Fd332 - Dell PowerEdge FD332 Owner's Manual

Hide thumbs Also See for PowerEdge FD332:
Table of Contents

Advertisement

Technical specifications—PowerEdge FD332
Physical
Width
Height
Depth
Weight (maximum)
Drives
Hard drives/SSDs
RAID Controller
Controller type
HBA Controller
Controller type
Environmental specifications
NOTE:
For additional information about environmental measurements for specific system configurations, see dell.com/
environmental_datasheets.
Temperature
Storage
Continuous operation (for altitude less than 950 m or 3117 ft)
Maximum temperature gradient (operating and storage)
Relative humidity
Storage
Operating
Maximum vibration
Operating
Storage
Maximum shock
Operating
21.09 cm (8.3 inch)
4.01 cm (1.57 inch)
52.36 cm (20.61 inch)
7.93 kg (17.48 lb)
Up to sixteen 2.5-inch, hot swap SAS or SATA hard drives/SSDs
PERC FD33xS, PERC FD33xD
HBA FD33xS, HBA FD33xD
–40°C to 65°C (–40°F to 149°F)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the
equipment.
20°C/h (36°F/h)
5% to 95% RH with 33°C (91°F) maximum dew point.
Atmosphere must be non-condensing at all times.
10% to 80% Relative Humidity with 29°C (84.2°F) maximum dew
point.
0.26 G
at 5 Hz to 350 Hz (all operation orientations).
rms
1.88 G
at 10 Hz to 500 Hz for 15 min (all six sides tested).
rms
One shock pulse in the positive z axis of 31 G for 2.6 ms in the
operational orientation.
Technical specifications—PowerEdge FD332
7
43

Advertisement

Table of Contents
loading

Table of Contents