Installing And Removing Storage Sled Components; Customer And Field Replaceable Units-Poweredge Fd332; Safety Instructions - Dell PowerEdge FD332 Owner's Manual

Installing and removing storage sled components

This section provides information on installing and removing the storage sled components. For information on removing and installing the
compute sled components, see the relevant sled Owner's Manual at dell.com/poweredgemanuals. For information on installing and
removing the enclosure components, see the enclosure Owner's Manual at dell.com/poweredgemanuals.
Topics:
• Customer and field replaceable units—PowerEdge FD332
•

Safety instructions

• Before working inside your system
• After working inside your system
• Recommended tools
• Storage sled
• Inside the sled
• Drive drawer
• Mini Enterprise Service Tag
• Hard drive/SSD assembly
• Storage controller module
• Bezel assembly
Customer and field replaceable units—PowerEdge
FD332
The following components are customer replaceable units (CRUs):
• hard drive/SSD assembly
• storage controller module batteries
NOTE: For information on removing and installing the storage controller module batteries, see the
Controller (PERC) 9 User's Guide at dell.com/storagecontrollermanuals.
The following components are field replaceable units (FRUs). Removal and installation procedures of the FRUs should be performed only by
Dell certified service technicians.
• Hard drives/SSDs from drive rails
• Mini Enterprise Service Tag (MEST)
• Storage controller module
• Bezel assembly
Safety instructions
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Dell PowerEdge RAID
Installing and removing storage sled components
4
17