Maintenance; General; Cleaning; Electrical Feed - Husqvarna WCV 180 Operator's Manual

General

WARNING! Inspection and/or
!
maintenance should be carried out with
the motor switched off and the plug
disconnected.
The lifetime of your machine can be extended
considerably if it is used, cared for and maintained in the
proper manner.

Cleaning

• In order for the machine to always be cooled
sufficiently the cooling air openings must be kept clear
and clean.
• Use compressed air to clean the motor.

Electrical Feed

WARNING! Never use damaged cables.
!
They can cause serious, even fatal,
personal injuries.
Check that the cord and extension cord are intact and in
good condition. Never use the machine if the cord is
damaged, hand it in to an authorized service workshop for
repair.

Daily maintenance

1 Check that nuts and screws are tight.
2 Check that the power switch unit works smoothly.
3 Check that the blade and th blade guard is not
damaged or cracked. Replace the blade or the blade
guard if it is exposed to impact or is cracked.
4 Clean the outside of the machine.
5 Check and clean the cooling air openings.
6 Check that the cord and extension cord are intact and
in good condition.

Repairs

Important All types of repairs may only be carried out by
authorised repairmen. This is so that the operators are
not exposed to great risks.
12 – English

MAINTENANCE