Download
Share
Print this page
Husqvarna LG 400 Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Power Tool
  5. LG 400
  6. Operator's manual

Husqvarna LG 400 Operator's Manual

Hide thumbs

Advertisement

Quick Links

LG 400
EN
Operator's manual
2-25

Advertisement

loading

Related Manuals for Husqvarna LG 400

Summary of Contents for Husqvarna LG 400

  • Page 1 LG 400 Operator's manual 2-25...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Transportation, storage and disposal......20 Safety................6 Technical data.............. 22 Operation..............10 EC Declaration of Conformity........25 Maintenance..............13 Introduction California Proposition 65 WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • Page 3 Product overview LED indicator overview (LG 400, Lombardini) 1. Operator's manual 2. Handle 3. Throttle control 4. Safety frame 5. Lifting eye 6. Lock lever for the handle 7. LED indicators 8. Ignition key 9. Compaction indicator 10. Safety straps 11.
  • Page 4 • E: Air filter. This LED comes on if there is blockage in the air filter. Not used. Engine overview Lombardini Honda 1. Oil tank cap and dipstick Read the manual carefully and make sure 2. Engine ON/OFF switch that you understand the instructions before 3.
  • Page 5 Move the product forward. Fuel: Unleaded gasoline with a maximum of 10% ethanol. Move the product rear- Ultra-low-sulfur diesel fuel only. ward. Manual start. Note: Other symbols/decals on the product refer to special certification requirements for some markets. Electrical start. Type plate Hydraulic oil level.

  • Page 6: Safety

    Safety Safety definitions • Keep the product clean. Make sure that you can clearly read signs and decals. Warnings, cautions and notes are used to point out • Do not use the product if it is defective. specially important parts of the manual. •...
  • Page 7 Vibration safety • Cancer • Birth defects • Skin inflammation WARNING: Read the warning instructions • Use correct equipment to decrease the quantity of that follow before you use the product. dust and fumes in the air and to decrease dust on work equipment, surfaces, clothing and body parts.
  • Page 8 • Do a check of the safety devices regularly. If the safety devices are defective, speak to your Husqvarna service agent. Engine ON/OFF switch (Honda) The engine can only start when the engine ON/OFF switch is set to "ON". The engine stops when you set the engine ON/OFF switch to "OFF".
  • Page 9 If the battery and wear. has a deformation or is damaged, speak to • Replace the vibration damping units if it is an approved Husqvarna service agent. necessary. Fuel safety WARNING: Read the warning instructions that follow before you use the product.

  • Page 10: Operation

    Safety instructions for maintenance • Do not change the product. Modifications that are not approved by the manufacturer, can cause serious injury or death. • Always use original accessories and spare parts. WARNING: Read the warning instructions Accessories and spare parts that are not approved that follow before you use the product.
  • Page 11 To start the product (LG 400, Honda) 5. Pull the starter rope handle slowly until you feel resistance. 1. Open the fuel valve. 2. Set the throttle control to idle speed. 6. Release the starter rope handle to let the starter rope go back.
  • Page 12 3. Turn the ignition key to the start position (C). stops. 4. Move the fuel valve to the OFF position. To start the product (LG 400, Lombardini) 1. Set the throttle control to idle speed. 2. Turn the ignition key to the ignition position (A). The indicators for battery charge and oil pressure come on (B).

  • Page 13: Maintenance

    4. Set the throttle control to the stop position. • B: Yellow LED. The degree of compaction is 30– 60%. • C: Green LED. The degree of compaction is 60– 90%. • C and D: Green and red LED. When these LED indicators flash, the ground surface has the maximum degree of compaction that is applicable for the product.
  • Page 14 O = Refer to the instructions in the engine manual supplied by the engine manufacturer. General product maintenance Before use, Weekly, Monthly, Yearly, each each 10 h each 100 h each 250 h 500 h Make sure that there are no fuel or oil leaks. Clean the product.
  • Page 15 Engine maintenance, Honda Before use, After the Weekly, Yearly, each each 10 h first 20 h each 100 h 300 h Clean the fuel valve of the carburetor. Clean the spark arrester screen on the muffler. Adjust the valve head clearance for the air intake and the exhaust valves.
  • Page 16 To do a check of the safety straps a) (LG 400, Honda): 1. Examine the safety straps at the front and the rear of the product. b) (LG 400, Lombardini): 2. Examine the screws and nuts on the safety straps.
  • Page 17 (LG 400, Honda): To clean or replace the air filter (LG 400, Honda) WARNING: Do not clean the air filter with compressed air. This causes damage to the air filter and the risk increases that you breathe the dangerous dust.
  • Page 18 1. Turn the knob on the air filter cover and remove the 3. Examine the V-belt for damages and wear. Replace air filter cover. the V-belt if it is necessary. 2. Remove the air filter. 3. Clean the air filter housing with a brush. 4.
  • Page 19 3. Clean the surfaces around the hole for the oil drain plug, the threads of the hole and the oil drain plug. Use a dry cloth and, if it is necessary, an applicable solvent. CAUTION: Do not use water to clean around and on the oil drain plug.

  • Page 20: Transportation, Storage And Disposal

    Speak to your Husqvarna dealer for information To replace the hydraulic oil about the correct battery charger. •...
  • Page 21 Obey the local recycling requirements and applicable regulations. • Do not discard the battery as domestic waste. • Send the battery to a Husqvarna service agent or discard it at a disposal location for used batteries. 1224 - 002 - 06.04.2020...

  • Page 22: Technical Data

    Technical data Technical data Honda Lombardini-Kohler Net weight, kg/lb 396/873.1 434/956.8 Operation weight (EN500, incl. oil, ½ fuel), kg/lb 398/877.5 436/956.8 Engine brand, type Honda, GX 390 Lombardini-Kohler, KD15-440 Engine power, kW/hp @rpm 8.2/11 @3100 7.2/9.7 @3100 Vibration frequency, Hz/rpm 60/3600 60/3600 Amplitude, mm/in.
  • Page 23 Noise and vibration emissions Honda Lombardini Sound power level, guaranteed L dB (A) Sound pressure level at the operator's ear, L , dB (A) Vibration level, a , m/s Noise and vibration declaration statement These declared values were obtained by laboratory type testing in accordance with the stated directive or standards and are suitable for comparison with the declared values of other products tested in accordance...
  • Page 24 Product dimensions Handle height, transport Length with handle folded, 1390/54.6 980/38.5 position, mm/in. mm/in. Handle height, operation Length including handle, 1150/45.2 1690/66.4 position, mm/in. mm/in. Bottom plate contact area, Height, mm/in. 0.28/3.01 990/38.9 /sq. ft. Length bottom plate, Width, mm/in. 967/37.4 650/25.5 mm/in.

  • Page 25: Ec Declaration Of Conformity

    EC Declaration of Conformity EC Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Reversible Plate Compaction Machine Brand Husqvarna Type/Model LG 400 Identification Serial numbers dating from 2019 and onwards...
  • Page 26 1224 - 002 - 06.04.2020...
  • Page 27 1224 - 002 - 06.04.2020...
  • Page 28 www.husqvarnacp.com Original instructions 1140391-26 2020-04-06...