Quantum DXi4520 Installation And Configuration Manual page 26

DXi4000 Installation and Configuration Guide
Figure 19 NAS Wizard: About
24
Note: This procedure assumes you are creating a NAS share in a Windows
environment. Refer to the
additional NAS configuration information.
1 Log on to the DXi4000 remote management console:
a On a computer on the same subnet as the DXi4000, enter the IP address of the
system in the Address box of a supported Web browser.
Use the IP address you specified when setting up the system.
The Login window displays (see
b Select Administrator, type password for the password, and click Login.
If this is the first time you have logged on since completing the Getting Started
wizard, then the Configuration Wizards page displays. Otherwise, the Home
page displays.
2 Access the NAS wizard:
Note: This procedure assumes you are joining the DXi4000 to a Windows
workgroup. If your site uses Active Directory instead of workgroups, refer
Quantum DXi4000 User's Guide
to the
a Windows domain using Active Directory.
a If the Wizards menu is not visible, click Wizards on the main menu.
b On the Wizards menu, click NAS.
The About page displays (see
3 Read the information about the wizard, and then click Next to continue.
The Protocol page displays (see
Quantum DXi4000 User's Guide
Figure 11).
(6-67092) for information on joining
Figure 19).
Figure 20).
(6-67092) for
Initial Configuration