Quantum DXi4520 Installation And Configuration Manual page 11

Figure 5 Installing the Chassis
Rails
Installing the DXi4000 System
Front
Installing the DXi4000 Chassis
WARNING: Ensure that the system is properly supported until the chassis rails are
locked into the slide rails on both sides.
1 To install the DXi4000 chassis (see
WARNING: The DXi4000 weighs 49.5 lbs (22.5 Kg). Two people are required to lift the
chassis.
a Pull the slide rails out of the rack until they lock into place.
b Align and insert the ends of the chassis rails into the ends of the slide rails. Push
the system inward until the chassis rails lock into place.
c Push or pull the blue tab located near the front of the system and slide the
system into the rack.
Figure 6):
DXi4000
Chassis rails
Back
Latch
9