Viewing Harmonics - Radian RD-30 Operation Manual

12.0 Viewing Harmonics

The RD-30 can analyze harmonics up to the 64
Harmonics may be viewed and analyzed during a meter test or as a stand-alone test.
Step 1
Make all appropriate connections so the RD-30 is powered from the source to be analyzed.
Step 2
Power on the potential and current sources. Power on the RD-30. Upon successful power up, the
RD-30's LED will be green and RR-MobileSuite will have launched. (see Section 8.1)
Step 3
Use the stylus and single tap on the Harmonics icon. The Harmonics screen will then appear.
Step 4
Use the stylus to scroll to the harmonics order that is to be viewed and analyzed. Amplitude
and phase data is available. A waveform and bar chart view is also available.To adjust the Base
Harmonic number use the stylus and increment the number up or down by selecting the arrows.
The highest Base harmonic available is the 150
the RD-30 can show up to the 204
use the stylus and increment the number up or down by selecting the arrows. The highest number
of Sub harmonics viewable is 10, numbered 0-9.
order. Data on volts and amps is available.
th
, if selected without any sub-harmonics shown;
th
harmonic. To adjust the number of sub-harmonics viewable
th
Viewing Harmonics
RD-30 Operations Manual
62