Run Standard Test - Radian RD-30 Operation Manual

The arrow keys and scroll bars may be used to view all of the test data and specific test informa-
tion saved.
8.9 Run Standard Test
A single tap on the Run Standard Test icon opens the following window.
In the Standard Test window, with the DUT 1, DUT 2, and DUT 3 tabs, the user sets up the test(s)
by entering the device(s) under test serial number, determining the desired function to test, select-
ing to test by time (seconds) or pulses and the duration of either, entering the device under test Kh
(0.00001 for Radian standards), selecting to test by energy per phase or total energy, and entering
the device under test type. Up to three standards, single phase and/or polyphase may be tested at
once.
Operating System and Structure
46
RD-30 Operations Manual