Harmonics - Radian RD-30 Operation Manual

Operating System and Structure

8.5 Harmonics

The RD-30 is capable of analyzing harmonics up to the 204 order. By single tapping on the
th
Harmonics icon, the following screen will appear.
Voltage and current harmonics are viewable by their order, including amplitude and phase
information. The raw data, a waveform plot, or a bar chart is viewable by selecting the applicable
tab at the top of the harmonics screen. To adjust the Base Harmonic number use the stylus and
increment the number up or down by selecting the arrows. The highest Base harmonic available
is the 150 , if selected without any sub-harmonics shown; the RD-30 can show up to the 204
th th
harmonic. To adjust the number of sub-harmonics viewable use the stylus and increment the
number up or down by selecting the arrows. The highest number of Sub harmonics viewable is
10, numbered 0-9. Below the waveform and the bar chart are shown.
39
RD-30 Operations Manual