Radian RD-30 Operation Manual page 51

Operating System and Structure
The onscreen keyboard may be moved around on the display by tapping in the darkened box
containing the words "Input Panel" and dragging it to a newly desired location. To enter
information, simply use the stylus to tap in the box where an input is required. This will create a
cursor in that field. Next, use the stylus to type on the keyboard to input the correct information.
When done entering information, the onscreen keyboard may be closed by following the same
procedure, which opened it. To close the bottom tool bar, use the stylus and simply tap on the
display anywhere above the tool bar.
51
RD-30 Operations Manual