Table of Contents
Advertisement
Status Indicator LED
10.0 RD-30 Status Indicator LED
The RD-30 has the ability to run diagnostics on itself. On the front panel an LED is used as a
status indicator. The following table will help define the status of the RD-30 when the unit is
powered up.
Solid Yellow
Solid Green
Flashing Yellow
Solid Red
Flashing Red
Upon power up the RD-30 is design to run a full Auto-Calibration. Once calibration is complete
the LED will change to solid green. If the LED flashes Red after the Auto-Calibration then it
failed to calibrate correctly.
53
RD-30 Operations Manual
RD-30 in full Auto-Calibration mode.
All Systems Operational.
Boot Loader Mode, used for hardware upgrades.
Hardware Failure
Memory Error/Auto-Calibration Error.
Hide quick links:
Advertisement
Table of Contents
