Radian RD-30 Operation Manual page 47

Operating System and Structure
Once the Standard Test(s) has been defined, a single tap on the Run tab opens the following win-
dow.
In the Run window the user verifies the serial number(s) of the device(s) under test and to also
select, by checking, which, if not all, device(s) under test to run. One to three single phase and/or
polyphase standards may be tested at a time. To begin the test, the user taps the Run button.
At the conclusion of the test, the Run window is filled in with data and test specific information as
in the following window.
The Percent Registration, Percent Error, Test Status, Metric Value, Function Tested, Minimum Per-
cent Registration, Minimum Percent Error, Minimum Percent Pulses, Minimum Percent Metric,
Standard Deviation of Percent Registration, Standard Deviation of Percent Error, Standard Devia-
tion of Number Pulses and Standard Deviation of the Metrics being tested are reported.
47
RD-30 Operations Manual