D-Link DWS-1008 User Manual page 330

DWS-1008 User's Manual
The following command disables load balancing for a server group:
clear server group group-name load-balance
Adding Members to a Server Group
To add RADIUS servers to a server group, type the following command:
set server group group-name members server-name1 [server-name2] [server-name3]
[server-name4]]
The keyword members lists the RADIUS servers contained in the named server group. A
server group can contain between one and four RADIUS servers. This command accepts
any RADIUS servers as the current set of servers. To change the server members, you must
reenter all of them.
For example, to add RADIUS server coot to server group shorebirds:
1. Determine the server group by typing the following command:
DWS-1008# show aaa
Radius Servers
Server
---------------------------------------------------------------------------------------------------
sandpiper
heron
coot
egret
Server groups
shorebirds (load-balanced): sandpiper heron egret
The RADIUS server coot is configured but not part of the server group shorebirds.
2. To add RADIUS server coot as the last server in the server group shorebirds, type the
following command:
DWS-1008# set server group shorebirds members sandpiper heron egret coot
success: change accepted.
Deleting a Server Group
To remove a server group, type the following command:
clear server group group-name
For example, to delete the server group shorebirds, type the following command:
D-Link Systems, Inc.
Addr
192.168.253.3 1812 1813
192.168.253.1 1812 1813
192.168.253.4 1812 1813
192.168.253.2 1812 1813
Configuring Communication with RADIUS
Ports T/o Tries Dead State
5 3
5 3
5 3
5 3
0 UP
0 UP
0 UP
0 UP
325