D-Link DWS-1008 User Manual page 212

DWS-1008 User's Manual
Displaying RF Attributes
To display the current values of the RF attributes RF AutoTuning uses to decide whether to
change channel or power settings, use the following commands:
show auto-tune attributes [ap ap-num [radio {1 | 2| all}]]
show auto-tune attributes [dap dap-num [radio {1 | 2| all}]]
To display RF attribute information for radio 1 on the directly connected DWL-8220AP access
point on port 2, type the following command:
DWS-1008# show auto-tune attributes ap 2 radio 1
Auto-tune attributes for port 2 radio 1:
Noise:
Utilization:
CRC Errors count: 122
D-Link Systems, Inc.
-92 Packet Retransmission Count:
0 Phy Errors Count:
Configuring RF Auto-Tuning
0
0
207