Radio Profiles - D-Link DWS-1008 User Manual

DWS-1008 User's Manual
Encryption
Encrypted SSIDs can use the following encryption methods:
• Wi-Fi Protected Access (WPA)
• Non-WPA dynamic Wired Equivalent Privacy (WEP)
• Non-WPA static WEP
Dynamic WEP is enabled by default.
Radio Profiles
You can easily assign radio configuration parameters to many radios by configuring a radio
profile and assigning the profile to the radios. To use a radio, you must assign a profile to the
radio. You can enable the radio when you assign the profile.
The table below summarizes the parameters controlled by radio profiles. Generally, the
only radio parameters controlled by the profile that you need to modify are the SSIDs and,
if applicable, Wi-Fi Protected Access (WPA) settings. The other parameter settings are
standard.
Defaults for Radio Profile Parameters
Parameter
11g-only
active-scan
beacon-interval
D-Link Systems, Inc.
Radio Behavior When
Default
Parameter Set To Default
Value
Value
disable
Allows associations with
802.11g and 802.11b
clients.
Note: This parameter
applies only to 802.11b/g
radios.
enable
Sends probe any requests
(probe requests with a
null SSID name) to solicit
probe responses from
other access points.
100 Waits 100 ms between
beacons.
Configuring DWL-8220AP Access Points
143