D-Link DWS-1008 User Manual page 199

DWS-1008 User's Manual
3. Add MAC users to MAC user group wpa-for-mac. Type the following commands:
DWS-1008# set mac-user aa:bb:cc:dd:ee:ff group wpa-for-mac
success: configuration saved.
DWS-1008# set mac-user a1:b1:c1:d1:e1:f1 group wpa-for-mac
success: configuration saved.
4. Verify the AAA configuration changes. Type the following command:
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server
----------------------------------------------------------------------------------------------
Server groups
Web Portal: enabled
set authentication mac ssid voice * local
mac-usergroup wpa-for-mac
vlan-name = blue
mac-user aa:bb:cc:dd:ee:ff
Group = wpa-for-mac
mac-user a1:b1:c1:d1:e1:f1
Group = wpa-for-mac
5. Create a service profile named wpa-wep-for-mac for SSID voice. Type the following
command:
DWS-1008# set service-profile wpa-wep-for-mac
success: change accepted.
6. Set the SSID in the service profile to voice. Type the following command:
DWS-1008# set service-profile wpa-wep-for-mac ssid-name voice
success: change accepted.
7. Enable WPA in service profile wpa-wep-for-mac. Type the following command:
DWS-1008# set service-profile wpa-wep-for-mac wpa-ie enable
success: change accepted.
D-Link Systems, Inc. D-Link Systems, Inc.
Addr Ports T/o Tries Dead State
Configuring User Encryption
194 194