D-Link DWS-1008 User Manual page 244

DWS-1008 User's Manual
Committing a Security ACL
To put the security ACLs you have created into effect, use the commit security acl command
with the name of the ACL. For example, to commit acl-99, type the following command:
DWS-1008# commit security acl acl-99
success: change accepted.
To commit all the security ACLs in the edit buffer, type the following command:
DWS-1008# commit security acl all
success: change accepted.
Viewing Security ACL Information
To determine whether a security ACL is committed, you can check the edit buffer and the
committed ACLs. After you commit an ACL, MSS removes it from the edit buffer.
To display ACLs, use the following command:
show security acl [editbuffer]
Use the editbuffer option to display the ACLs that you have not yet committed to nonvolatile
storage. To display the ACLs that are already committed, omit the option. ACLs are not
available until you commit them. (To commit an ACL, use the commit security acl command.
See Com.)
Viewing the Edit Buffer
The edit buffer enables you to view the security ACLs you create before committing them
to the configuration. To view a summary of the ACLs in the edit buffer, type the following
command:
DWS-1008# show security acl editbuffer
ACL edit-buffer table
ACL
---------------------------------------------------------
acl-99
acl-blue
acl-violet
D-Link Systems, Inc.
Type Status
IP Not committed
IP Not committed
IP Not committed
Configuring and Managing Security ACLs
239