D-Link DWS-1008 User Manual page 162

DWS-1008 User's Manual
AP Security Requirements
AP
Security
Setting
AP
Security
Required
AP
Security
Optional
1.MSS generates a log message listing the AP serial number and fingerprint so you can verify the AP's
identity.
Verifying a DWL-8220AP's Fingerprint on a switch
To verify a DWL-8220AP's fingerprint, find the fingerprint and use the set dap fingerprint
command to enter the fingerprint in MSS.
Finding the Fingerprint
A DWL-8220AP's fingerprint is listed on a label on the back of the AP. If the AP is already
installed and operating, use the show dap status command to display the fingerprint. The
following example shows information for Distributed AP 8, including its fingerprint:
DWS-1008# show dap status 8
Dap: 8, IP-addr: 10.2.26.40 (vlan 'default'), AP model: DWL-8220AP,
manufacturer: D-Link, name: DAP08
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
====================================================
State: operational (not encrypted)
CPU info: IBM:PPC speed=266666664 Hz version=405GPr
Uptime: 1 hours, 8 minutes, 17 seconds
Radio 1 type: 802.11g, state: configure succeed [Enabled]
operational channel: 1 operational power: 1
base mac: 00:0b:0e:0a:60:00
bssid1: 00:0b:0e:0a:60:00, ssid: public
bssid2: 00:0b:0e:0a:60:02, ssid: default
Radio 2 type: 802.11a, state: configure succeed [Enabled]
operational channel: 48 operational power: 11
base mac: 00:0b:0e:0a:60:01
bssid1: 00:0b:0e:0a:60:01, ssid: public
bssid2: 00:0b:0e:0a:60:03, ssid: default
D-Link Systems, Inc.
Fingerprint
AP Has
Verified in
Fingerprint
MSS?
Yes Yes
No
No Not Applicable No
Yes Yes
No
No Not Applicable Yes
id=0x29f1886d447f111a ram=33554432
s/n=0424000779 hw_rev=A3
Configuring DWL-8220AP Access Points
AP Can Establish
Management Session
with Switch?
Yes
No
Yes
1
Yes
1
157