Humanscale Float Assembly Instructions Manual page 5

Assembly Instructions
When using your own work surface that is
at least 3/4 " thick and has no pre-drilled holes
Parts Required
A. (1) Float Table Base
B. (2) Float Wing Brackets
C. (2) Float Feet
D. (1) Mounted or Removable Spring Tension Adjuster
E. (1) Mounted Spring Tension Adjuster Plastic Housing
F. (12) ¾" Wood Screws
G. (4) 1 ½" Wood Screws
H. (4) M6 Short Flat Head Machine Screws
I. (8) M8 Long Machine Screws
J. (4) ½" Wood Screws
K. (1) Safety Leg Pin
Tools Required
Extension Hex Drive
5/32 " Hex Drive
3/16 " Hex Drive
#2 Phillips Screwdriver
Pencil
Ruler
Power Drill
5
A
C
B
K
Hardware Bag
F G
I J
E
D
H