Operating Controls - Ahlborn ALMEMO 2470-1S Operating Instruction

1. 1 Operating controls

1. 1 OPERATING CONTROLS
Back of unit:
(7) Battery box
2 ALMEMO 2470
* only 2470-2, -2S
(1) Meas. inputs M0 und M1*
M0 ... M1* for all ALMEMO sensors
M10..30 3 additional channels
M4* Function channel, differential
M11*..M34* 6 additional channels
(2) Outputs A1*, A2*
A1* USB interface (ZA 19019-DKU)
RS 232 (ZA 1909-DK5)
Ethernet (ZA 1945-DK)
RS 422 (ZA 5099-NVL/NVB)
2. Analog output (ZA 1601-RK)
A2* Network cable (ZA1999-NK5/NKL)
Trigger input (ZA 1000-ET/EK)
Relaisausgänge (ZA 1006-EGK)
1. Analog output (ZA 1601-RK)
(3) DC connector
Mains adapter (ZA1312-NA1,12V,0.2A)
Cable, el. isol. (ZA 2690-UK, 10-30V)
5V and USB (ZA 1919-DKU5)
(4) Sleep LED
(5) LCD
(a) Function
(b) Meas. point, 2nd meas. value, function
(c) Units for 2nd measured value
(d) Units for 1st measured value
(e) 1st measured value
(f) Operating states:
Measured value memory
►II REC
Battery status : full / empty
Smoothing activated
Meas. value corrected
Relative measuring
REL
(6) Operating keys
Switch device ON / OFF,
ON
To delete, press and hold down
Meas. point selection
M▲ M▼
,
Max. / min. value,
MAX , MIN
To delete, press and hold down
Max. / min. / limit value
.. MAX , MIN
Measured value memory
MEM
To display value, press and hold down
Function
FCT
Programming:
PROG
►
Relative meas., adjustment
FCT To cancel
▲, ▼, ►...
To enter data