Keypad; Entering Data - Ahlborn ALMEMO 2470-1S Operating Instruction

9. Display and keypad

9.2 Keypad

To operate the device a keypad with 7 keys is provided.
Basic functions
To switch the device ON (s. 7.6)
To switch the device OFF
To select measuring points (s. 10.2.1)
To display maximum value (s. 10.3)
To display minimum value (s. 10.3)
To zero-set the measured value (s. 10.5)
To save the measured value (s. 10.4)
To select functions (s. 11)
To cancel function (ESC):

9.3 Entering data

When a programmable parameter is selected (see 11, 13) and unlocked
(see 13.2) the value can be either deleted or programmed.
To program press
You should now be in programming mode
To delete the programmed values press:
To change the arithmetic sign.
To increment the selected digit press
To decrement the selected digit press
To move forward to the next position press
To move back to the previous position press
Each position is programmed just like the first
To save and exit press
To cancel without saving press
To confirm this input (OK):
To cancel inputs (ESC):
22 ALMEMO 2470
Key
ON
press and hold down
ON
M ▲ M ▼
or
MAX To delete, press and hold down
MIN To delete, press and hold down
►
PROG , To delete
MEM
FCT
◄
PROG
The input position flashes
FCT
M ▼
M ▲
...
M ▼
...
►
◄
M ▼
/
PROG
◄
...
►
◄
PROG , FCT
M ▼ ►
...,
...
Input flashes
Input flashes