Roland ColorCAMM PRO PC-600 User Manual page 43

Correcting an Image
When performing output, this corrects and outputs the original image.
If necessary, make the setting at the [Image Correction] tab.
3
To use a special color, choose the color to use from
[Special], then associate the image color (the color
you specified using the program) with an ink ribbon.
Install an ink-ribbon cartridge of the color you chose
in the PC-600.
To print using only special colors, clear the selection
for the [Process] item.
4
Choose the type of cartridge.
5
To print a photographic image, select [PhotoColor].
To print a poster image or drawing, select
[SpotColor].
If the substrate is visible due to variations in printing
alignment for each ribbon, select [Trapping].
Chapter 3 - User's Reference
41