Double Din/Stacked Iso Mount Units Provision - Metra Electronics 95-7333 Installation Instructions Manual

DOUBLE DIN/STACKED ISO MOUNT
*
Note: Refer also to the instructions included with the aftermarket radio.
1 Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Figure A)
2 Slide the Double DIN or stacked ISO
mount unit(s) into the bracket/trim
plate assembly and secure the
unit(s) to the assembly using the
screws supplied with the unit(s).
(Figure B)
Continue to final assembly.
95-7333 KIT ASSEMBLY
UNITS PROVISION
3
A
B