Weighing Resolution Setting; Reset Password Setting; Bluetooth Setup Setting - acaia Lunar Operation Manual

Weighing Resolution Setting [ rESoL ]
1. The default Weighing Resolution is set to [ dEFAUL ]: the division is 0.1g / 0.02oz.
button to switch the weighing resolution between [ dEFAUL ] and [
2. Press
3. When the Weighing Resolution is set to high, division will be 0.01g/0.0005oz. The default
display will show [
4. Press and hold
selected option.
Note : After setting Weighing Resolution to high, the default display will show [0:00 0.00] with timer
in Dual Mode and Auto Start Mode.
Reset Password Setting [ rESEt.d ]
1. Select [ YES ] to clear the bluetooth connection password.
2. Press and hold
Bluetooth Setup Setting [ bt_SEt ]
1. OFF: The bluetooth is disabled. The scale does not allow any bluetooth connection.
2. on: The bluetooth is enabled. The scale allows bluetooth connection. User may connect the
scale with acaia APPs.
3. Press and hold
Chapter 4: Configuration
0.00 ] in Weighing Mode.
button for 1 second until [ rESEt.d ] is shown on LED to confirm the
button for 1 second until [ bt_SEt ] is shown on LED to clear the password.
button for 1 second until [ SLEEP ] is shown to confirm the modification.
hiGh ].
18