Weighing Resolution Setting; Weighting Mode Setting; Dual Display Mode Setting; Auto Start Mode - acaia lunar Operation Manual

Weighing Resolution Setting [ rESoL ]
1. The default Weighing Resolution is set to [ dEFAUL ]: the division is 0.1g / 0.02oz.
button to switch the weighing resolution between [ dEFAUL ] and [
2. Press
3. When the Weighing Resolution is set to high, division will be 0.01g/0.0005oz. The default
display will show [
4. Press and hold
option.
5. Note : After setting Weighing Resolution to high, the default display will show [0:00 0.00] with
timer in Dual Display Mode and Auto Start Modes.
Weighing Mode Setting [ NoDE_1 ]
1. The default Weighing Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Weighing Mode is enabled.
3. OFF: The Weighing Mode is disabled.
4. Press and hold
option.
Dual Display Mode Setting[ NodE_2 ]
1. The default Dual Display Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Dual Display Mode is enabled.
3. OFF: The Dual Display Mode is disabled.
4. Press and hold
option.

Auto Start Mode

1. The default Auto Start Mode with Droplet Setting is set to ON, which means this mode is
enabled.
2. ON: The Auto Start Mode with Droplet is enabled.
3. OFF: The Auto Start Mode with Droplet is disabled.
4. Press and hold
option.
Chapter 4: Configuration
0.00 ] in Weighing Mode.
button for 1 second until [ NoDE_1 ] is shown on LED to confirm the selected
button for 1 second until [ NoDE_2 ] is shown on LED to confirm the selected
button for 1 second until [ NoDE_3 ] is shown on LED to confirm the selected
Setting[ NodE_3 ]
button for 1 second until [ NoDE_4 ] is shown on LED to confirm the selected
hiGh ].
23