SRAM HydroR Service Manual page 36

15 Connectamajig™ only: Calipers with a Connectamajig at the banjo must
replace the banjo when replacing the hose.
The caliper can be removed or remain installed on the frame or fork.
Remove the Connectamajig banjo. Apply grease to the new banjo
bolt o-ring(s) and install on the bolt. Install the bolt into the caliper and
tighten the new banjo.
8 mm Connectamajig
DOT grease Flat Mount
8 mm 9.8-11.8 N·m (86-104 in-lb)
T25 9.8-11.8 N·m (86-104 in-lb)
DOT grease
Flat Mount
Post Mount
Flat Mount
36
Hose Installation