SRAM HydroR Service Manual page 21

12 Use a shop towel to remove excessive DOT fluid from the brake
assembly.
13
Unthread the bleed syringe from the bleed port.
Place a shop towel below the brake assembly to catch any spilled DOT
fluid. Clean DOT fluid from all painted surfaces.
Install the bleed screw into the bleed port.
14 Spray isopropyl alcohol onto a shop towel and clean the brake
assembly.
NOTI CE
Shop towel
Isopropyl alcohol
Master Cylinder Piston Removal
T10 1.5-1.7 N·m
Shop towel
21