SRAM HydroR Service Manual page 14

7 Tighten the banjo bolt.
8 Spray isopropyl alcohol on the caliper body and clean it with a rag.
9 Insert the bleed block into the caliper. Install the pad retention bolt.
10 Cut the hose to install a new barb and compression fitting.
You must install a new hose barb and compression fitting before
reconnecting the brake lever to the hose.
NOTI CE
9.8-11.8 N·m (86-104 in-lb) 8 mm
Post Mount
2.5 mm
SRAM Hydraulic Hose Cutter
9.8-11.8 N·m (86-104 in-lb) T25
Flat Mount
Bleed block
Caliper Piston Installation
14