Saving Files - Snap-On Modis Ultra User Manual

Scope Multimeter

8.7.2 Saving Files

Selecting the Save icon writes the data stored in buffer memory to a file. Saving data files is useful
when trying to isolate an intermittent problem or to verify a repair during a road test. The saved file
can be played back (similar to a movie clip) by selecting Previous Vehicles and Data > View
Saved Data. See
NOTE:
i
The Save icon performs the same function as "Save Movie" function choice for the programmable
Shortcut button, see
The saved file can also be downloaded to a personal computer (PC) using the Mini USB jack.
Once connected to the PC, the files can be printed, transferred, and copied using ShopStream
Connect. ShopStream Connect is a companion application that interfaces the diagnostic tool with
a PC. ShopStream Connect is available at no cost, and can be downloaded online. See the
ShopStream Connect website information at the front of this manual for additional information.
The toolbar control icons are described in
Common Toolbar Control
z
To save files:
Select the Save icon from the toolbar.
•
A save dialog box displays while files are being saved. The file is saved when the message
box disappears.
View Saved Data‚ on page 119 for additional information.
Configure Shortcut Key‚ on page 123 for details.
Icons‚ on page 14.
Figure 8-34 Save dialog box
105
Saving and Reviewing Scope / Multimeter Data Files
Scope Multimeter Control Icons‚ on page 77 and