Configuration Overview; Gathering Configuration Information - 3Com VCX Connect Installation And Configuration Manual

Configuration
Overview
Gathering
Configuration
Information
Table 1 Server Parameters
Parameter Default Value
IP Address Primary Server: 192.168.1.190
Secondary Server: 192.168.1.192
Network Mask 255.255.255.0
NOTE: Configuration of the parameters in
Table 2 Media Gateway Parameters
Parameter
IP Addresses of Media
Gateways in a VCX
Connect 100 Server
CAUTION: Mixtures of server types are not supported.
The single primary server configuration can be updated later to include a
secondary server. The server being added must be the same as the
original (primary) server. For example, you cannot add a VCX Connect
200 server as a secondary server to a VCX Connect 100 primary server.
All VCX Connect servers arrive from the factory configured with default IP
addresses. To adapt the servers to your environment, you must:
Reconfigure the network attributes of the servers
Modify some of the default configuration parameters of the servers
Install license key files to support more than the 25 telephone users
and 25 voice mailboxes provided by the factory default license.
Many parameters are preconfigured on VCX Connect servers in order
make installation and configuration easier. Some of these parameters
must be modified in order to accommodate the servers to your network.
When you run the
to modify the network and other parameters of the servers, you will need
the information in
Table 1
Default Value
Primary VCX Connect 100 Server Gateway:
192.168.1.200
Secondary VCX Connect 100 Server Gateway:
192.168.1.202
vcx-config-network
Table 1:
New Value
You must choose IP addresses that are compatible with the
network segment on which you plan to install the servers.
Modify this mask if the network segement on which you
plan to install the servers requires a different mask.
are described in Chapter

Configuration Overview

or the
vcx-reconfigure
2, "VCX™ Connect Server
Changes
You must choose IP addresses that are
compatible with the network segment
on which you plan to install the VCX
Connect servers.
13
script
Installation".