Evd Version - Wega EMA Use And Maintenance Manual

9.5

EVD version

Programming
Always program the right push-button panel first,
and, if necessary, the others subsequently.
Place the programming lever ON la levetta di pro-
grammazione (1) posta sotto il pannello frontale
destro della carrozzeria;
spout;
right-hand push-button panel; all the dose but-
ton LEDs will come on;
firm by pressing the PROG/STOP button (2);
when finished programming, return the pro-
gramming lever (1) to the OFF position.
42
In some models, the programming lever has been
eliminated; to access the programming, it is enough
to press the PROG/STOP key for at least 5 seconds
with all push button panel LED coming on. To
confirm the dose press the PROG/STOP key or the
selected dose key again.
In other models, to access programming it is neces-
sary to use a special key switch.
To exit programming it is sufficient to wait a few
seconds.
(2) of the first
(3)
-
Coffee delivery
By operating on the right push-button panel,
the other push button panels are programmed
i
automatically.
Programming of each dose must be carried out
with ground coffee and not with previously used
grounds.
Place the coffee cup under the dispensing spout;
press the desired dose key and wait for coffee to
be delivered (LED comes on).
To stop dispensing ahead of time, press the STOP/
i
PROG button again or the button selected again.
If the push button panel is locked, use the manual
Coffee Delivery button.
1
User manual