Junior Version - Wega EMA Use And Maintenance Manual

9.4

JUNIOR version

Programming
Place the programming lever (1) in the ON posi-
tion. It is located under the front right-hand panel
of the body;
place the coffee cup under the dispensing spout;
press the PROG/STOP key for at least 5 seconds
until all dose key LED are on;
press the desired dose
to confirm the dose press the dose key or the
PROG/STOP key again;
repeat this operation for the other dose buttons;
programming will be terminated automatically
after a few seconds.
upon completion of programming, place the
(1)
programming lever
The programming of every dose must be done
i
with ground coffee and not with previously used
grounds.
User manual
button;
back in the OFF position.
1
Coffee delivery
Place the coffee cup under the dispensing spout;
press the desired dose key: wait for coffee to be
delivered (LED comes on);
to stop delivery of coffee in advance, press the
delivery key again or press the key
in the event of anomalies or if the push button
panel is locked, use the manual
2
STOP;
switch. (2).
41