Cup Heater (Optional) - Wega EMA Use And Maintenance Manual

For optimal foaming, it is recommended to ob-
serve the following simple rules:
heat only the amount of milk you intend to use;
once heated, it will have to be completely poured
from the jug and not heated again:
the milk to be foamed must have a starting tem-
perature of 4°C;
The use of the steam dispensing point (steam
!
nozzle) must always be preceded by the
performance of the condensation draining
operation for at least 2 seconds.
Leave the steam nozzle immerged in the milk only
i
for the time required for heating.
Do not open the steam tap with the steam nozzle
immerged in milk while the machine is off.
Carefully operate the steam nozzle using the anti-
i
burn rubber washer (5): contact with the nozzle or
the steam may be harmful to people, animals or
property.
To keep the steam nozzle tips in perfect working
order, it is advisable to carry out a brief dry delivery
after each use. Keep the tips clean at all times using
i
a cloth dampened in lukewarm water. Handle the
nozzle with utmost caution due to the hazard
resulting from the presence of high-temperature
steam.
44
11
Cup heater
The cup heating device is for heating cups before
they are used.
place the cups on the upper surface (1) of the coffee
machine;
start the electric heating element with the switch
(2).
1
2
For safety reasons we advise against putting
i
cloths or other objects on the upper surface (1)
of the machine as they could obstruct normal air
circulation.
(optional)
User manual