Thermador Masterpiece MEDS301WS Use And Care Manual page 38

Masterpiece series built-in steam oven
Hide thumbs Also See for Masterpiece MEDS301WS:
Table of Contents

Advertisement

Available languages

Available languages

Start
NOTICES
Only use the descaler recommended by Thermador
for the descaling program. Other descalers may
damage the appliance.
Descaler order no. 573828
If you have used a steam-assisted operation
immediately before descaling, you must first switch the
appliance off so that the residual water is pumped out
of the evaporator system.
Descaling solution: Do not allow the unmixed
descaling crystals or mixed solution to come into
contact with the control panel or other surfaces on the
appliance as prolonged exposure may cause damage
to the surfaces. Immediately remove any descaler by
rinsing with tap water.
Touch the ON l OFF touch button.
1.
Touch the MENU touch button.
2.
Swipe to the left or right to select "Descale
3.
Touch continue.
4.
The duration of the descaling program is displayed. It
cannot be changed.
Touch continue again.
5.
Remove the water tank and fill it with descaling
6.
solution.
Mix 32 fluid oz. (950 ml) of water with 25 g of descaler
7.
to make a descaling solution to fill the watertank.
Once the water tank has been filled with descaling
8.
solution, push it back in again fully.
Follow the on-screen instructions.
9.
The appliance will now be descaled. The remaining
time counts down on the display. As soon as the
descaling program has finished, an audible signal
sounds.
First rinsing cycle
Open the appliance door.
1.
Remove the water tank, rinse thoroughly, fill with water
2.
and reinsert.
Close the appliance door.
3.
Touch the ON l OFF touch button.
4.
The appliance rinses itself. As soon as the wash cycle
has run through, a signal sounds.
Second rinsing cycle
Open the appliance door.
1.
Remove the water tank, rinse thoroughly, fill with water
2.
and reinsert.
Close the appliance door.
3.
Touch the ON l OFF touch button.
4.
The appliance rinses itself. As soon as the wash cycle
has run through, a signal sounds.
38
Subsequent Cleaning
Open the appliance door.
1.
Empty water tank, rinse thoroughly then dry.
2.
Switch off the appliance.
3.
Descaling is complete and the appliance is ready for
use again.
,
".

Advertisement

Table of Contents
loading

Table of Contents